10×60W RGBW Zoom Pixel Beam Bar Moving Head Light
A unified 10×60W RGBW zoom pixel beam bar with integrated multi-zone CW/WW/RGB strobe system, designed for structured beam alignment and synchronized stage compositions.
Description
This 10×60W RGBW Zoom Pixel Beam Bar Moving Head Light is engineered as a high-output pixel beam fixture designed for structured stage environments and professional touring systems.
It integrates ten 60W RGBW zoom beam engines with a dedicated multi-zone strobe system featuring CW, WW, and RGB LED sections, delivering layered beam projection and high-impact white and color strobe effects within a single moving bar platform.
Unlike multi-head pixel beam arrays that rely on independent beam modules, this fixture emphasizes unified bar movement, aligned beam output, and integrated strobe layering to create strong visual lines and dynamic impact moments on large-scale stages.
Product Structure
The fixture integrates ten 60W RGBW LED beam engines arranged in fixed linear alignment across a reinforced metal bar housing.
In addition to the beam section, a dedicated multi-zone strobe array is built into the front assembly, consisting of:
96 × 3W CW LEDs
96 × 3W WW LEDs
96 × 0.5W RGB LEDs
This layered architecture enables simultaneous beam projection and high-output white or color strobe effects within a single fixture.
The bar operates as a unified moving platform, maintaining optical alignment across all beam engines during tilt motion.
Optical System
The motorized zoom system allows precise beam shaping:
Beam angle: 2.8°–31°
Field angle: 5°–46°
This zoom range enables both narrow long-throw aerial beams and wider beam spreads for mid-range stage coverage.
White output color temperature: 6,300K
Total luminous flux: 22,400 lm
The LED system is rated for an expected service life of approximately 20,000 hours.
Control & Connectivity
The fixture supports professional control environments through:
DMX512
RDM
DMX channel modes (7 selectable modes):
17CH
27CH
99CH
108CH
168CH
8+100CH
8+160CH
170CH
The control interface includes:
5-button navigation system
LCD display panel
Software updates can be performed via DMX signal connection.
Signal connections:
3-pin XLR
5-pin XLR
RJ45
Power connections:
Power connector input/output
Movement System
Tilt (Y-axis) operating angle: 202°
The unified tilt structure ensures consistent beam alignment during programmed movement sequences, supporting synchronized stage compositions.
Electrical Specifications
Input voltage: 180–240V ~ 50/60Hz
Power consumption: 800W
Performance & Effects
Within the 10×60W RGBW Zoom Pixel Beam Bar Moving Head Light, each 60W RGBW beam engine delivers saturated color output with smooth RGBW mixing and linear dimming from 0–100%.
The integrated strobe system supports:
High-intensity cold white flash
Balanced warm white burst
RGB segmented color strobe effects
By combining unified bar tilt movement with layered strobe segmentation, the fixture supports:
Structured aerial beam lines
Synchronized linear sweeps
Impact flash moments during cue transitions
Layered beam and strobe compositions
The optical alignment and unified motion design emphasize controlled beam architecture rather than segmented independent head movement.
Applications
This fixture is suitable for:
Touring stage productions
Concert systems
Festival main stages
Large DJ booths
Fixed installation venues requiring structured beam arrays
Its unified movement structure and high-output strobe layering make it appropriate for environments where visual symmetry and synchronized beam lines are required.
It is often deployed alongside multi-head pixel beam systems to create layered beam structures and synchronized stage compositions.
English